High quality adhesive for all PVC inflatable boats. 30ml tube
PVC Repair Instructions
To complete the repair you will need –
Adhesive masking tape scissors pencil small paint brush mixing pot acetone clean rag hot air gun or hair dryer spoon
- Cut patch to appropriate size and round off corners. The patch should cover the hole by at least 25mm in every direction
- Use a pencil to trace the patch on the surface of the boat
- Tape around the outside of the pencil line using masking tape
- Clean all surfaces with acetone
- Apply a thin coat of adhesive to the boat and the patch
- Leave the adhesive for 10 to 15 minutes and then apply a second coat
- Wait another 5 to 10 minutes and then heat all surfaces with a hairdryer or hot air gun to reactivate the adhesive
- Carefully apply the patch and rub into position with any hard item. A spoon is a good option
- Remove the masking tape and clean any excess glue with acetone
- You should not attempt to repair the boat in direct sunlight or in humid conditions
- For best results leave the boat deflated for 24hrs. You could partially inflate the boat after 3 hours in an emergency
- We recommend the boat be inspected professionally if the cut is larger than 60mm or structurally affected
Note: All website prices exclude freight and handling. To calculate the amount please click ADD TO CART and enter your postcode.